PROTOTYPE FOR 3-D PRINTING(USING EAGLE 7.6)

ECHO HELLO WORLD BOARD

SOFTWARE USED:EAGLE 7.6

PRODUCT:ECHO HELLO WORLD BOARD

USAGE:3-D MAKING OF THE PRODUCT

PROCEDURE:

STEP 1:Click on ADD option by the side of the EAGLE

STEP 2:Take  various components from FAB through ADD as shown:

-->resonator

-->atinnty44

-->ftdi

-->avrispsmd

-->resistor and capacitor

step 3:establish connection through NET

step 4:board view it(press-highlighed with blue circle)

step 5:autoroute in TOOLS and find errors.

 USE .PNG IMAGE OF THE BOARDVIEW AND LOAD IT TO FABMODULES FOR THE 3D PRINT.

  

Procedure for creating a 3-Dimensional object.

CREATION OF A 3-D OBJECT USING  RHINOCEROS 5.0

Step by procedure:

Step 1:Drawing a circle and series of circle using command:-->array

step 2:Erasing inner circles using command:-->trim

step 3:For finding center use the command:
-->boundingbox

step 4:Draw a straight line:

step 5:using commands for expanding the circle:
-->cap

step 6:draw an outline of the circles and drag up on the perspective part.
-->sweep1

step 7:delete existing projection and use fillet on the rail(height line)
-->fillet

thus to make the rail smooth curve.

step 8:use scale for drawing a smaller circle inside.

step 9:move the inner circle using command:

-->move

step 10:rotate the circle using command:

-->rotate3D

step 11:outline using:
-->sweep1

step 12:use sphere at end and use command:
-->arraypolar

step 13:final touch with materials of your choice:

THANK YOU...

victor joseph

STARTING A BLOG

I often thought about creating a blog;but always something stopped me to create one.